You Dream It, We Build or Repair It.

716-652-0033
Servicing Western New York / 991 Maple Road, Elma, NY
general welding fabrication new york
Locations

BOSS Drag Pro 180Z Plow

Manufacturer: BOSS Snowplow
Location: Elma & Rochester
CALL FOR PRICING (716)652-0033 Elma / (585)697-7660 Rochester

Drag Pro 180Z Sell Sheet

 

Get your rear in gear with a DRAG PRO 180Z- the most versatile rear-mounted system available, with multiple blade positions and the ability to plow forward and in reverse. The DRAG PRO 180Z mounts from the rear using a universal fifth-wheel rail system and a receiver hitch, allowing you to pull snow from the back while clearing large areas like commercial parking lots. Rotating wings allow the operator to adjust quickly to various plowing situations, surface areas and job types. With advanced stability from the two-point attachment system the operator can freely plow forward, in reverse and in the Z-position.
  • 2-Point Attachment System Designed for 3/4 and 1-ton trucks with access to a universal fifth-wheel rail system and a receiver hitch. Installation of a standard fifth-wheel rail kit, available at most truck equipment retailers, is required. With both points of attachment (fifth wheel rails and receiver hitch) engaged, the DRAG PRO 180Z offers advanced stability, rigidity and reliability for performance.
  • No Shear Pins The hydraulic relief feature of the 180Z actively protects the wings and blades when in contact with an obstacle- in either forward or reverse.
  • Full 180-Degree Rotating Wings Rotating wings allow the operator to adjust quickly to various plowing situations, surface areas and job types. With advanced stability from the two-point attachment system, the operator can freely plow forward, in reverse and in the Z-position.
  • Front and Rear Productivity Combine Drag Pro 180Z with a front-mounted plow to increase productivity and cut time on the job up to 50%.

**NOT RECOMMENDED FOR TRUCKS OVER 1 ton

WATCH VIDEO BELOW TO SEE ALL CONFIGURATIONS!

https://youtu.be/lfGPeZb7ubM

 

PrintSpecifications
Width (wings folded-outside dimension) 100″
Width (wings extended-outside dimension) 16′
Weight 1,450lb w/hitch system
Moldboard Height 24″
Moldboard Thickness 7ga Steel
Moldboard Cutting Edge 1-1/4″ x 6″
Wing Cutting Edges 1-1/4″ x 6″
Wing Cylinders 2-3/4″ x 1-9/16″ x 9″
Lift Cylinders 2-3/8″ x 1-3/16″ x 12″
Attachment System Fifth-wheel rails& receiver hitch (2-point attachment)
Float & D-Force Standard
Adjustable Raise/Lower Valve Standard
Worklights Standard
Truck Applications 3/4 & 1 ton trucks w/fifth wheel rail mounting capability

Categories: , Product ID: 2149

Description

Manufacturer: BOSS Snowplow
Location: Elma & Rochester

Drag Pro 180Z Sell Sheet

Get your rear in gear with a DRAG PRO 180Z- the most versatile rear-mounted system available, with multiple blade positions and the ability to plow forward and in reverse. The DRAG PRO 180Z mounts from the rear using a universal fifth-wheel rail system and a receiver hitch, allowing you to pull snow from the back while clearing large areas like commercial parking lots. Rotating wings allow the operator to adjust quickly to various plowing situations, surface areas and job types. With advanced stability from the two-point attachment system the operator can freely plow forward, in reverse and in the Z-position.
  • 2-Point Attachment System Designed for 3/4 and 1-ton trucks with access to a universal fifth-wheel rail system and a receiver hitch. Installation of a standard fifth-wheel rail kit, available at most truck equipment retailers, is required. With both points of attachment (fifth wheel rails and receiver hitch) engaged, the DRAG PRO 180Z offers advanced stability, rigidity and reliability for performance.
  • No Shear Pins The hydraulic relief feature of the 180Z actively protects the wings and blades when in contact with an obstacle- in either forward or reverse.
  • Full 180-Degree Rotating Wings Rotating wings allow the operator to adjust quickly to various plowing situations, surface areas and job types. With advanced stability from the two-point attachment system, the operator can freely plow forward, in reverse and in the Z-position.
  • Front and Rear Productivity Combine Drag Pro 180Z with a front-mounted plow to increase productivity and cut time on the job up to 50%.

**NOT RECOMMENDED FOR TRUCKS OVER 1 ton

PrintSpecifications
Width (wings folded-outside dimension) 100″
Width (wings extended-outside dimension) 16′
Weight 1,450lbs w/hitch system
Moldboard Height 24″
Moldboard Thickness 7ga steel
Moldboard Cutting Edge 1-1/4″ x 6″ UHMW
Wing Cutting Edge 1-1/4″ x 6″ UHMW
Wing Cylinders 2-3/4″ x 1-9/16″ x 9″
Lift Cylinders 2-3/8″ x 1-3/16″ x 12″
Attachment System Fifth-wheel rails and receiver hitch (2-point attachment)
Float & D-Force Standard
Adjustable Raise/Lower Valve Standard
Worklights Standard
Truck Application 3/4 & 1 Ton Trucks w/fifth wheel rail mounting capability

Related products