Buyers Loader Snow Pusher

Manufacturer: Buyers
Location: Elma & Rochester
CALL FOR PRICING (716)652-0033 Elma  /  (585)697-7660 Rochester
Loader Snow Pushers | ScoopDogg by Buyers
  • Strong, durable construction with an H-beam backbone.
  • Prevent roll back damage with lower posts positioned higher off the ground.
  • Durable 7 Ga rolled steel moldboard.
  • Carry strength to the whole pusher with fully-welded high and low posts that tie directly into the H beam.
  • Abrasion-resistant wear shoes made of AR400 steel.
  • Premium grade rubber compound cutting edge.
  • Durable Tuff-Kote™ powder coat protects your pusher for years to come.
  • Included high-visibility blade guides.
    • Loader Snow Pushers from ScoopDogg by Buyers offer a strong and reliable containment plow for contractors looking to clear large areas of hard-packed snow and ice. The pusher is built on a foundation of strength. The 12 in. H-beam backbone dissipates blunt force and adds additional strength where it is needed most. The H-beam can’t carry the load alone, which is why upper and lower posts tie directly into the H-beam. Lower posts are positioned higher off the ground to help prevent damage in case of a roll back. The 5 in. channel is braced directly to the upper posts and H-beam structure to take the oncoming force.
    • These pushers are crafted with pride and built using high quality materials. This model features a 7 Ga moldboard and 3/8 in. thick side-containment plates. The upper and lower post are fully seam welded for the most durable construction.
    • Buyers Products Tuff Kote™ powder coating process extends the life of your pusher. First, it’s sandblasted to remove all impurities and contaminants. Next, it’s primed to seal and fill any inconsistencies in the material. A top coat then acts as an additional primer and prepares the surface for the final treatment — a super durable polyester powder coat to protect your plow from the elements for years to come.
    • ScoopDogg by Buyers snow pushers come ready to work with AR400 extremely abrasion resistant wear surfaces on the wear shoes. The shoes are attached with Grade 5 Hex Head Cap Screws (HHCS). The 1-1/2 by 10 in. rubber compound cutting edge gives you durability and ground contact you need to get the job done right.

Product Common Use: Parking Lots, Hard-Packed Snow and Ice

 

Print Specifications
Blade Width 12′ / 14′ / 16′ / 18′ / 20′
Minimum Required Machine Weight 13,000lb / 16,000lb / 25,000lb / 30,000lb / 40,000lb
Minimum Required Horsepower 100HP / 120HP / 125HP / 140HP / 170HP
Categories: , Product ID: 2705

Description

Manufacturer: Buyers
Location: Elma & Rochester
Loader Snow Pushers | ScoopDogg by Buyers
  • Strong, durable construction with an H-beam backbone.
  • Prevent roll back damage with lower posts positioned higher off the ground.
  • Durable 7 Ga rolled steel moldboard.
  • Carry strength to the whole pusher with fully-welded high and low posts that tie directly into the H beam.
  • Abrasion-resistant wear shoes made of AR400 steel.
  • Premium grade rubber compound cutting edge.
  • Durable Tuff-Kote™ powder coat protects your pusher for years to come.
  • Included high-visibility blade guides.
    • Loader Snow Pushers from ScoopDogg by Buyers offer a strong and reliable containment plow for contractors looking to clear large areas of hard-packed snow and ice. The pusher is built on a foundation of strength. The 12 in. H-beam backbone dissipates blunt force and adds additional strength where it is needed most. The H-beam can’t carry the load alone, which is why upper and lower posts tie directly into the H-beam. Lower posts are positioned higher off the ground to help prevent damage in case of a roll back. The 5 in. channel is braced directly to the upper posts and H-beam structure to take the oncoming force.
    • These pushers are crafted with pride and built using high quality materials. This model features a 7 Ga moldboard and 3/8 in. thick side-containment plates. The upper and lower post are fully seam welded for the most durable construction.
    • Buyers Products Tuff Kote™ powder coating process extends the life of your pusher. First, it’s sandblasted to remove all impurities and contaminants. Next, it’s primed to seal and fill any inconsistencies in the material. A top coat then acts as an additional primer and prepares the surface for the final treatment — a super durable polyester powder coat to protect your plow from the elements for years to come.
    • ScoopDogg by Buyers snow pushers come ready to work with AR400 extremely abrasion resistant wear surfaces on the wear shoes. The shoes are attached with Grade 5 Hex Head Cap Screws (HHCS). The 1-1/2 by 10 in. rubber compound cutting edge gives you durability and ground contact you need to get the job done right.

Product Common Use: Parking Lots, Hard-Packed Snow and Ice

 

Print Specifications
Blade Width 12′ / 14′ / 16′ / 18′ / 20′
Minimum Required Machine Weight 13,000lb / 16,000lb / 25,000lb / 30,000lb / 40,000lb
Minimum Required Horsepower 100HP / 120HP / 125HP / 140HP / 170HP